On-Site Support
The 3P Prinz engineering department works closely with the customer to provide on -site and remote support for all installation and configuration needs.
3P® Pumps
Rotary hollow disc positive displacement pumps range
3P® Pumps
Special Executions and Supplies
M series pump, inspectable.
Send a request to our customer service
Pompa della Serie D con giunto motore distanziato
Inviare una richiesta al nostro servizio clienti
D-series diesel wheel-mounted hollow disc pump
Send a request to our customer service
M series pump with wheeled filter unit
Send a request to our customer service
M Series hollow disc pump with speed variator
Send a request to our customer service
M Series electric pump with predeterminator
Send a request to our customer service
PRINZ® 3P rotary hollow disk pumps are positive displacement pumps that have a wide range of uses in handling and transporting petroleum and process products. This type of single impeller pump is ideal for transferring medium, high and very high viscosity liquids containing even small amounts of suspended solids. Special materials such as Duplex, Super Duplex, stainless steel or special alloy, as well as special coating material for parts in contact with the fluid, are available upon request.
Typical Applications:
– Fuel Oil – Methanol – Gasoline – Ethanol – Diesel – Oil & Gas – Biofuels – Processing – Feedstock
The supply is not limited to pumps only
3P Prinz also provides:
1. Skid or Custom Skid type mounting base
2. Instrumentation
3. On-skid piping with Valves
4. Control system
5. Auxiliary equipment
Executions and Special Materials
3P prinz can produce the full range of products with special materials for the wet parts of pumps.
Starting from cast iron to special alloys, such as:
Inconel® – Hastelloy® – Alloy 20 – Duplex/Super Duplex.
Material selection arises from the service fluid, temperature, and surroundings.
The design life of a pump is due to the proper selection of materials.
Main Features
SELF-PROCESSING
Primes without any auxiliary device and with empty suction tube (suction capacity 9 meters water column). Only at the first start-up is it necessary to fill the pump with a liquid.
REVERSIBLE
The pump maintains constant flow rate and total head by working in both directions.
DISK ELASTICITY
This feature makes it possible to recover any wear, thermal expansion, and to pump fluids with solid particles in suspension.
LOW ROTATIONAL SPEED
Especially suitable for “delicate” and/or extremely viscous fluids. This feature also ensures long-lasting and reliable operation.
Key technical features | |
Diameter Pipes [mm] | 25 to 200 |
Scope [m3/h] | 0.3 to 210 |
Operating pressure [bar] | 10 |
Max. operating temperature [°C] | 280 |
Rotational speed [RPM] | 0 to 500 |
Viscosity [cSt .] | 1 – 200,000 |
Sectors of Use
| APPLICATIONS |
|---|
| Energy sector |
| Fuel oil |
| Methanol |
| Gasoline |
| Ethanol |
| Diesel |
| Biofuels |
| Processing Industry |
| Acids |
| Paper |
| Carbon dioxide |
| Glue |
| Paints |
| Inks and Coatings |
| Solvents |
| Isocyanate |
| Poli-olii |
| Soaps and Cleansers |
| Polyurethane |
| Military and naval sector |
| Fuel oils |
| – Kerosene |
| Diesel fuel |
| Lubricating oils |
| Transportation Sector |
| Oils |
| Bitumen |
| Fuels |
| Liquid waxes |
| Chemicals |
| Fertilizers |
| Liquid foods |
| Bio lubricants |
| Food and pharmaceutical sector |
| Milk production |
| Beverages |
| Packaging |
| Sauces and Condiments |
| Feed |
| Cosmetics |
| Pharmaceutical Preparations |
Construction Details
| MATERIALS | |
|---|---|
| Enclosure | Trim and wet parts |
| Cast iron | Kabonium steel |
| Stainless Steel | Stainless Steel |
| Duplex and Super Duplex | Duplex and Super Duplex |
| Inconel® | Inconel® |
| Hastelloy® | Hastelloy® |
| Bronze Nickel-Aluminium | Bronze Nickel-Aluminium |
| Monel K® | |
| HVOF Spray Coated | |
| Notes: Other alloys upon request | |
| Certification | ||
| Products: | Electric Group: | |
| CE standard | CE and ATEX standards | |
| Upon request ATEX and/or API | UL and ATEX standards | |
| NEMA standard | ||
| On the components: | Others on request (Diesel) | |
| ISO EN 10204-2.1 | ||
| ISO EN 10204-2.2 | ||
| ISO EN 10204-3.1 | ||
| ISO EN 10204-3.2 | ||
| On Request |
| – Compliance with API 676 Standard |
| – Instrumentation |
| – Mounting on Skid or Custom Skid Type Stand |
| – Skid mounting Piping with valves |
| – Control equipment |
| – Auxiliary Equipment |
| – Special designs for low or high temperatures and/or critical environmental temperatures |
BEFORE PLACING AN ORDER
Download the form.
Once filled out, email to: sales@3pprinz.com
